robotino doesn't access to startup menu

[amer]

i was working with my robotino ....when i restarted it screen light up and stack just like that ...doesn't appear any thing ...i've tried to connect mt screen with vga but there is nothing
please can any one help me

[Guest]

Hello amer,

That means, that you operating system is not working/booting properly. Connecting a screen will not help.
Check, wheather your CF-Card is mounted right. Try unmounting and putting back in and restart.

You will very likly have to reset your CF-card in that case:

http://wiki.openrobotino.org/index.php?title=CF_card

Kind regards

[amer]

thanks for your reply ..i've tried unmounting cf card and putting it again ..but still not working and i notice that wi fi work.....is there a cf card reader to connect to my laptop

[joao.junho16]

You should put your CF card into a USB adapter, then open the command promp in administrator mode and run the commands as the link to our friend Beckmann sent.
If you can not retrieve the card, let me know to send you the step by step I have to retrieve the card.
best regards

[amer]

ok thanks ...

[amer]

how r u joao ,,i've checked my cf card and i found systeme files....then i've tried to put cf card to another embedded pc but there is error message appear "unknown block(0,0)"......can u help me ??what i have to do

[joao.junho16]

Please send prints or photos error for me to analyze and see if you need to format the CF-card.
If you need to format the card I send the commands and files to format the CF-card.
But first send me bug pictures to make the check.
best regards

[amer]

https://www.dropbox.com/s/jgfpskvxyh...error.jpg?dl=0 the error that was appear on screen ....but when i connect parallel port of my embedded pc to the robotino screen
it appear another error https://www.dropbox.com/s/bfgmr2dkqe...error.jpg?dl=0
and this is my robotino embedded pc that doesn't work https://www.dropbox.com/s/i25uoluawq...%20pc.jpg?dl=0

[joao.junho16]

Send me your email address to send you the commands to format the CF card
We will update it to version 2.4

[JuanPowell]

As per my experience you should put your CF card into a USB adapter, then open the command promp in administrator mode and run the commands as the link to our friend Beckmann sent.
If you can not retrieve the card, let me know to send you the step by step I have to retrieve the card.

https://www.7pcb.com/